Picture a 2013 BMW 328i rolling into Chesapeake Import Services on a cold Annapolis morning. The owner mentions that the engine started rattling at startup a week ago and that the noise now shows up when pulling away from a stoplight. If that car has an N20 or N26 four-cylinder turbo engine, our technicians already know which short list of tests comes first, and they run those tests in the same order every time. Chesapeake Import Services has repaired European vehicles in Annapolis since 1991, and a timing chain rattle on these BMWs is one of the repairs where an early diagnosis changes the outcome the most.
This guide covers which BMWs carry these engines, what the noise sounds like, why the chains and guides wear, what we check, and how a class action settlement may affect what you pay.
Which 2012 to 2015 BMWs have the N20 or N26 engine?
BMW used the N20 and N26 turbocharged four-cylinder engines across several models. The 2017 lawsuit filing over this problem named these 2012 to 2015 models:
- X1 (E84)
- Z4 (E89)
- 5 Series (F10), such as the 528i
- X3 (F25), such as the xDrive28i
- 3 Series (F30), such as the 328i
Six-cylinder BMWs from the same years use a different engine family, so a 335i or 535i falls outside this group. Your production date is on the sticker in the driver’s door jamb, and the engine code is on the engine itself, so a technician can confirm which engine you have in a couple of minutes.
What does a BMW N20 timing chain rattle sound like?
Most owners describe a chain-like rattle for a few seconds after a cold start, something like a handful of marbles in a coffee can. Others notice a whine from the front of the engine, rough running, or a check engine light. Complaints gathered in the lawsuit filing also mention knocking, weak acceleration, and a car that would not restart.
Try a simple test on a cold morning. Park outside, start the engine with the windows down, and stay quiet for thirty seconds. Note whether the rattle fades as the oil warms, whether it returns when you press the throttle, and whether a warning light appears. Record the sound on your phone. A short video helps a technician far more than the sentence “it makes a funny noise.”
Why do N20 timing chains and guides wear out early?
The timing chain keeps the camshafts and the crankshaft turning in step, and it rides along guides that hold its path and its tension. According to coverage of the 2017 lawsuit filing, plaintiffs alleged that the plastic guide on these engines was made of a defective material that could break apart, and that the secondary chain driving the oil pump and balance shaft assemblies could stretch. Those are allegations from the filing, and they describe the same symptoms owners bring to us.
When a guide wears or breaks, the chain loses its path and its tension. The timing can drift, the engine can set fault codes in the P0012, P0015 and P0016 range, and a chain that skips a tooth can damage valves and pistons. One plaintiff in the filing reported paying $7,000 for a used engine after a 2013 X3 28i failed at 83,000 miles. That example is the reason we ask owners to schedule a visit as soon as a new rattle appears.
How we diagnose a rattling N20 at our Annapolis shop
Our technicians start by listening to the engine cold, because a warm engine can hide the noise. Next comes engine diagnostics with our scan tools, where we read stored fault codes and look at how the camshaft and crankshaft positions compare. Then we check the oil level and condition and ask when the last service happened, since low or tired oil makes chain components work harder.
If the evidence points to the timing chain system, we inspect the chain drive and explain what we found before any parts are ordered. On these engines we also look at the oil pump chain, because the same family of parts is involved. You get a clear answer on what is worn, what the repair involves, and what could happen if the repair waits.
Expert tip: why oil quality matters for a BMW timing chain
The chain tensioner and the variable valve timing parts on these engines depend on clean oil at the right pressure. Annapolis driving makes that harder than it sounds. Short trips to the grocery store or the Naval Academy gate never let the engine fully warm up, so moisture and fuel can collect in the oil. We use Castrol and AMSOIL oil products and BG fluid products, and a regular oil change with the correct oil specification is one of the simplest ways to protect a timing chain. Ask us about an interval that fits how you really drive.
Could BMW’s settlement cover part of your N20 timing chain repair?
The timing chain lawsuit, Gelis et al. v. BMW, ended in a class action settlement that a New Jersey federal court approved in February 2021. The settlement reimburses eligible owners for certain timing chain repairs and extends warranty coverage on affected cars. BMW described the benefit in a service information bulletin that also states it is not a recall notice. Eligibility depends on your model, production date and VIN, and on whether you opted out of the settlement.
BMW administers that benefit, so ask a BMW dealer or the settlement administrator whether your car qualifies before you pay for a repair. We can put what we find on your car in writing, and the eligibility decision stays with BMW.
BMW N20 timing chain questions Annapolis owners ask
Can I keep driving my BMW with a timing chain rattle? We cannot give you a safe number of miles, because it depends on what is worn. A chain that skips can damage the engine, so we suggest a diagnosis before any long trip.
Will the check engine light always come on? No. The rattle can show up before the computer stores a code, which is why the sound itself deserves attention.
Does a timing chain repair include the oil pump chain? We inspect it during diagnosis because the secondary chain on these engines drives the oil pump and balance shaft assemblies. What gets replaced depends on what the inspection shows.
Do you work on other BMW engines? Yes. Our technicians maintain and repair a wide range of models, and our BMW repair page has more detail.
Schedule an N20 timing chain inspection at Chesapeake Import Services in Annapolis
Chesapeake Import Services is a veteran-owned shop at 1717 McGuckian St, Annapolis, MD 21401. Call 410-267-8411 to schedule an appointment for your BMW. We are open Monday through Friday, 8:00 AM to 5:00 PM, and our 24-hour drop-off and pick-up box lets you leave or collect your keys after hours. Free local Lyft rides help you get around while we work, and most parts are backed by a 24-month/24,000-mile warranty unless otherwise specified.
Follow us on Facebook and follow us on X for more tips from our technicians.


Comments are closed